How to Use Wondershare Recoverit

Step 1Select a device

To recover data from Mac computer, please select a drive under the "Hard Disk Devices" tab or "Desktop" under the "Select location" tab.

If you know the exact file path of your lost data, you can also choose "Select Folder" under the "Quick Access" tab.

Step 2Scan the location

Recoverit will start an all-around scan. With the advanced scanning and searching algorithm, all your lost, deleted or formatted data can be found.

You can pause or stop the scanning process if you find your data at any time.

If you wish to recover large-sized or complex videos, then you can also click on the “Advanced Video Recovery” feature on the bottom-left corner of the screen. This will perform a deep scan, particularly to recover lost videos. You can read further to know about this feature in detail.

1Pinpoint files during the scanning

In case the results would yield an overwhelming amount of data, then you can filter the results. There is a panel on the right that can help you filter the results based on various parameters.

Moreover, you can also directly search the keywords in the right-up box. Then Recoverit will recognize all the files referred to the keywords.

2Pause or Stop the Scanning

Even if Recoverit starts to scan the selected location for your lost data, you can pause or stop it at any time. You can suspend the scanning temporarily by clicking, and the notice "Scanning Paused" will display on the progress bar. If you have found something you want, you can stop the process at any point by clicking on the stop button.

Step 3 Preview and Recover Files

Recoverit allows users to preview the recoverable files before proceeding to the recovery step. If you are premium users, you can preview files with no limits. If you utilize the free version, you can still get a 10-second preview.

You can select the targeted files and click the "Recover" button to retrieve your files back.

1 Preview files on Mac

• Preview an image

• Preview a video

• Preview an Audio File

• Preview a Word Document

• Preview a PDF document

• Preview a Powerpoint document

2 Recover and save Mac files

After reviewing the files and confirming they are what you want, you can now get them all back using Recoverit. Directly hit on the "Recover" button to retrieve your lost data back and choose a path to save the recovered files.

Please do not save the files on the hard disk where you deleted or lost the data before to prevent the overwriting of data.

Note: The steps are applicable for recovering data from Mac’s internal hard drive. If you need to get data back from Mac’s Trash, external devices or a crashed Mac, please read a little further.

Video Tutorial on Lost or Deleted Data Recovery on Mac

Every time you delete a file temporarily, it is moved to Mac’ Trash. You can usually go to the Mac Trash to restore it afterward. However, if you delete files permanently or empty the Trash, Recoverit becomes an indispensable tool for you to get them back.

The data present on the Mac Trash can come from different sectors, partitions, hard drives or even external devices connected on Mac. Thus, scanning the Mac Trash for all data types will require a lot of time and bring some burden on your Mac.

To fix the problem, Recoverit offers 2 kinds of recovery modes, namely all-around recovery and deep recovery. The all-around recovery mode is to scan some frequently used files on the Trash, while the deep recovery mode can do the deep scan and even dig out the system files.

Step 1 Select the Trash

To restore Trash and retrieve deleted files from emptied Trash, select the recycle bin under the "Quick Access" as the target location. Click "Start" to commence the scan.

Step 2 Scan the Trash

When it comes to Mac Trash recovery, there are two kinds of recovery modes. The all-around scan will be initiated first. It will take you a few minutes to finish it.

Can't find files on Mac Trash? Try All-Around Recovery.

If you cannot find the deleted or lost files, then you can try the "deep Recovery" option from the bottom of the interface. It will scan and search for more files from emptied Trash deeply, although more time is needed.

Sit back and wait as the application would scan your Mac and recover the data deleted from its Trash folder. You can preview your files and even halt the scanning process as per your requirements.

Step 3 Preview and recover your data

After the scanning, you can locate, preview and select files before recovery. Finally, click "Recover" to retrieve the files back.

1 Locate Files

Once the scan is completed, you can utilize the below features to locate some specific data more quickly.

• File Type: Filter results for specific file types, such as photos, multiple file types, or view all file types.
• Time: This will let you filter files for specific dates on which they were modified or created.Toggle between the feature to show system files or hide system files.
• File Size: To view all files irrespective of their size or files of a specific size (like 100-500 MB).
• All Files: By clicking this, you can view all files or only view the deleted files.

2 Preview files with Recoverit

Recoverit supports to preview different types and formats of data, falling back on different options.

• Thumbnails
• The "Preview" button
• Double click a file
• Toggle between different preview modes

3 Recover and save files from Mac Trash

Then, you can select the targeted files and click on the "Recover" button to retrieve your data back from Trash.

After recovering files, please do not save them to the same location. A different location like external hard drive or any other source is recommended.

Once you find the data stored on an external device gets lost, don’t worry! Recoverit can help you recover lost data from an external media connected to your Mac computer. Regardless of the type and model of the external device, you stand a good chance of getting them back using Recoverit. For example, external hard disks, memory cards, cameras, music players, pen drive, etc.

Step 1 Select the external media

To recover lost or deleted files from an external media, you should first connect it into your Mac, and then choose it as the target location for data scanning and searching.

Step 2 Scan the removable media

An all-around scan starts once you make the choice. It usually takes a few minutes.

During the process, you can filter and locate files of your choice.

Step 3 Preview and recover files

After it, Recoverit provides the preview function for you before recovery. A variety of files can be previewed, such as pictures, videos, movies, audios, music, documents, and so forth.

Then, select one or more files you want to restore and click "Recover" to get all of them back.

A mirror copy of your entire physical device or logical drive stored as a single or a set of files is known as the disk image. Recoverit has made it super easy for you to import existing and create new disk images of different storage devices. It enables you to recover data from several bad sectors or badly aged disks.

Step 1 Select the “Disk Image”

Open the tool and go to the “Hard Drives and Locations” option. Now, tap on “Disk Image.” You will find it under the “Quick Access” tab.

Step 2 Import Existing / Create a New Disk Image File to Scan

You have the option to import either the existing file or create a new disk image. “Situation 1” assists you in importing the existing disk image file, whereas “Situation 2” helps you create a new disk image.

Situation 1: Import the Existing File

Make sure a disk image file exists on your computer before you proceed. Now, just hit the “Import an existing disk image file” button. It will allow you to import your disk image file.

Choose the existing disk image file and import it into Recoverit by clicking the “Open” button.

Now, Recoverit will check whether the file you uploaded is valid.

If the selected file is valid, Recoverit will import it automatically and display its details on your screen, as shown below.

Now, click the “Scan” button to allow Recoverit to scan the imported disk image file. Once the scanning is completed, move to the Step 3 below.

If your system does not have an existing disk image file, and you want to create one, make sure you read through “Situation 2.”

Situation 2: Create a New Disk Image

Click on the blue-colored anchored link, saying “create a new disk image file,” as shown below.

Now, you will see a couple of partitions on your screen. It is time to select a partition or drive to create a new disk image and choose a particular path to save it, as shown below. Then, hit the “Create” button.

Recoverit will start the disk image creation process, and please wait some time until it finishes. Remember, the time may vary depending on the disk size.

A notification will appear on your screen when the creation is complete. You can see the details, like image size, name, path, and creation time.

Now, tap the blue-colored “Scan” button, and Recoverit will start scanning the created disk image files.

Step 3 Preview and Recover

You can see the scanning progress at the bottom of your screen. There is no need to wait for the scan to complete, and you can stop it at any time once you have found the correct file you wish to retrieve.

It is time to preview the files before you move toward recovering them. All you need is to tap on “Preview.”

Now, select a particular path to save your computer’s recovered disk image data files. Make sure the path you choose this time differs from where your files were deleted or lost.

The above steps will enable you to recover your data from the disk image in no time.

Mac computer is less vulnerable to system crash compared to Windows computer. However, it does not mean the Mac crash will never happen. To recover data from a crashed or unbootable Mac, you need to boot it up at first.

Step 1 Preparations for Mac Crash Recovery

• A blank USB flash drive
• A new computer that is working normally
• Connect the bootable media to the new computer

Step 2 Create a bootable media

To recover lost data on a crashed Mac, you have to use Recoverit to create a bootable drive for starting the Mac up. The below steps can help you do that.

1 Select Mac Crash Recovery

The first step is to launch the data recovery software on the new computer and choose "Recover from Crash Computer" under the last tab. Click "Start" to go on.

2 Select a USB drive

Recoverit can be used to create a bootable media to help you extract data from a crashed system.

Please insert a USB drive to create a bootable media drive. Once you connect it to your working computer, it will show in the drop-down box. Insert more than one external drives? Click the arrow to view the drop-down menu and choose a blank one. Click "Start" to go on.

3 Backup and format data

To ensure the enough space on the USB drive, it will be formatted, and thus, all the data present on it will be wiped. So back up important files in advance.

Click "Format" and the next interface will show you the procedure of formatting the USB drive.

4 Creating the bootable media

After the drive formatting, Recoverit starts creating the bootable media drive on Mac. During the process, do not remove the USB flash drive out of your Mac computer.

5 Finish creating bootable media

Usually a few minutes later, the bootable USB flash drive will be created.Then there will be a guide for you to boot your crahsed Mac.

6 Boot crashed Mac from USB flash drive

1. Plug in the bootable media drive to the unbootable Mac.
2. Press and hold the Option key when restarting the computer.
3. Select Recoverit Bootable Media Drive when it appears.

Step 3 Recover data from crashed Mac

• After finishing the above steps, select files to copy.
• Connect a good hard drive to the crashed Mac.
• For the destination, choose the hard drive you connect, and click “Start Copy” button. Then the screen shows the process of copying data from the crashed Mac to the hard drive.
• When the copying process is finished, it will show “Copy files completed!”.

Malware infection, power failure, OS errors, overheating, and accidental formatting are the top reasons why you lose your sensitive data from NAS devices. Doesn’t matter what the scenario is; the Wondershare Recoverit NAS Recovery feature helps you get out of this trouble remotely without unplugging NAS hard drives. This feature is highly compatible with Iomega StorCenter, BTRFs-based NAS servers, LaCie, QNAP, Netgear ReadyNAS, Western Digital, and other similar NAS devices.

Step 1 Choose the “NAS Recovery” Mode

Launch Recoverit once you download and install this software on your system. Go to the left bar from the main interface, look for “NAS and Linux”, and enter this mode. It is time to search for NAS devices. For this, tap on the “NAS Recovery” - a blue-colored button at the bottom of the Recoverit window.

Step 2 Connect Your NAS Device

As soon as the search gets completed, you will see the detected NAS devices on your screen. They will be displayed under the “NAS Servers” section.

Tap on the desired NAS device you want to recover lost or deleted files.

Now, provide your IP and Port along with your User Account and Password to remotely connect your NAS device. After providing the requested information, click on the button - Connect - to proceed.

After the connection is established, an automatic scan will get enabled to search for the lost data in the selected NAS device.

In case you failed to connect the NAS server, you can go to Solutions For NAS/Linux Connection Failed Issue to find the desired solution.

Step 3 Scan and Recover

Wait until the scanning gets completed. To see the scanning progress, you can look at the bottom bar of the software screen.

Now, tap on the “Preview” option to view the files before restoring them. It allows you to verify whether Recoverit has found the right file for you. Once you are satisfied, hit the “Recover” button, and the program will start restoring your data.

Now, select a new location (compared to the one where your sensitive data was lost or deleted) to save the restored stuff.

Have you followed all the above-listed steps carefully? Congratulations! Your lost data is back.

Though Linux is an incredible operating system for professionals, it is vulnerable to data loss. There is where Wondershare Recoverit comes in to swim your worries away. It is an efficient Linux data recovery tool that performs smooth scanning and ensures precise recovery of Linux data files. It offers great support for the Ext4 file system. Within 3 simple steps, Recoverit restores your damaged or lost data.

Step 1 Choose the "Linux Recovery"

Download Recoverit, install, and open the software on your system. You will see the below window on your computer’s screen. Go to the left pane and click on “NAS and Linux." Press the button "Linux Recovery."

Step 2 Connect Your Linux Computer

Put IP, Port, User Account, and Password in the respective sections to establish a connection remotely. Right after providing the desired information, press the “Connect” button at the bottom-right corner of the window.

Wait for a while until a connection is successfully established. Once done, automatic scanning will be started to find the data files you lost earlier.

Step 3 Preview and Recover Lost/Deleted Files

Again wait until the program finds you deleted or lost files. The scanning time may vary depending on the data size you wish to get back on your Linux computer. You can look at the bar at the bottom to view the scanning progress (45% in this case). You don’t have to wait for the complete scanning; instead, you can pause it anywhere in the middle as soon as Recoverit finds the file you want to restore.

Now, you will be able to preview the data files before you recover them. This feature sets Wondershare Recoverit apart. If you have previewed the right stuff, it is time to hit the “Recover” button.

Now, browse and select the path to save the restored data, and click the “Recover” button. Doing this will help you save the recovered files on your Mac computer. Don’t forget to select a different location compared to where the files were lost.

Are you worried about recovering your lost or damaged videos/photos on your Mac? Recoverit “Enhanced Recovery” will surely lend a helping hand. Quick and deep scans help you recover data from all storage devices, including Seagate, Sony, SD Card, GoPro, DJI, and the list goes on.

Due to the large sizes, the drives store HD videos in different fragments. Common data recovery tools restore fragmented videos, which often becomes annoying. The Enhanced Recovery feature helps Recoverit collect different fragments and match them all to recover a full video. It supports HD, UHD, 4K, and 8K video recovery.

Step 1 Select “Enhanced Recovery” Mode

Open Wondershare Recoverit once it is downloaded to your system. Click on the “Enhanced Recovery” feature on the left side of the main interface.

You will see both external drives and hard drives on your computer’s screen. Select the right drive where you lost your photos or images.

Now, choose the desired file format to restore your videos/photos on Mac.

1. Recoverit will consider MP4 and MOV as the default file formats.
2. The scanning time will increase if you select more formats.

Right after you select the desired format, click the “Start” button.

Step 2 Complete Quick and Deep Scan

Recoverit will perform “Quick Scan” and “Deep Scan” to locate your lost or damaged videos/pictures. Quick Scan performs scanning for all files and renders source files only (e.g., video fragments). At the same time, Deep Scan scans the selected format to collect and match all fragments to ensure full video recovery; therefore, it takes a bit longer than Quick Scan.

You will be able to see the scanning progress at the bottom of the Recoverit screen. The below image shows 45% scanning has been done so far. If you find the desired files you wish to restore before the scanning is completed, you can stop it over there.

Don’t forget to preview the scanned data before recovering. Doing this makes sure you restore the right videos/photos on Mac.

Step 3 Preview and Recover

Here, you can preview photos or videos you lost earlier. It is time to mouse over the thumbnail and tap on the “Preview” button . It will enable you to preview the data you want to get back.

Remember, you can preview videos of up to 30 seconds only, whereas there is no limit to preview for photos.

After previewing your video/photo, the next step is to recover it. For this, click the “Recover” button, and it will help you restore your data. Now, browse your computer to select the location and save the restored photo/video.

We highly recommend you save the recovered file in a different location than the one it was damaged or lost. Give the Recoverit “Enhanced Recovery” feature a try today. You will be happy to see the outcomes.

Recoverit can repair your corrupt and damaged videos under different scenarios, including shooting, recording, transferring, editing, converting, or processing. It has a dedicated feature for Video Repair that you can access from its home. Just select the “Video Repair” option from the welcome screen and click on the “Start” button. The application has two different video repairing modes – Quick and Advanced that you can run according to your needs.

Step 1 Add corrupted video

As the Video Repair application would be launched, you can simply add the corrupted videos on it. There is no restriction on the size of the video that you can add. Just drag and drop the videos from any location to Recoverit. You can also click on the add button to launch a browser window to locate the videos you want to repair.

Step 2Repair Corrupt Videos

As Recoverit would start the repairing process, you can simply wait for it to be completed. There is an indicator to let you know the progress of the repairing operation.

1 Preview the repaired video

One the repairing process is completed, you can preview the results on the interface. Just click the Play button to prevew it.

2 Advanced repair (add a sample video)

If the video has been severely damaged or the standard scan is not able to yield the expected results, then you can just click on the "Advanced Repair" option instead.

1 Add a Sample Video

To perform the advanced video repair, you need to first add a sample video to the application. The sample video should be of the same format as the corrupted video file and shot on the same device as well. The application will let you browse your Mac’s directory to add the sample video.

2 Repair Corrupted Videos

Once the sample video is added, just start the video repair process and wait for a while as the advanced repair might take longer to repair your video file.

Step 3Save the repaired videos

In the end, you can just preview the video repairing results on the interface and save it on the location of your choice. A browser window will be launched, letting you save the repaired videos to a secure location on your Mac or any other source.